Well, you asked and Fieldpiece delivered!
First thanks to everyone at Fieldpiece for making this happen! We could not be more excited to work with them, and for Job Link to work with measureQuick. measureQuick now has full access to the Fieldpiece Job Link® probes.
I know 1/2 of you are too excited to read past here, so ……to get started, completely close your app, (swipe close), reopen it, and you should see it check for updates and load the latest version of measureQuick with Job Link compatibility!
Wow, Factor! OK, I cannot lie, this is really freaking cool, and it will not disappoint. It’s everything you asked for and more. The direct connection to the Job Link probes opened a whole host of opportunity including a probe management system with signal strength, and battery life indication as well as live readings from each probe in the probe management section. A live connection in mQ gives us a lot of flexibility, so there are some exciting things to read below.
Expanded capabilities! measureQuick can handle multiple Job Link Probes allowing for the addition of wireless discharge line temperature, and outdoor air to the standard Job Link measurement set. Additional clamps and hydrometers are available separately and will offer additional measurements that will extend Job Link capability within measureQuick and provide a means of more sophisticated diagnostics.
New Features! What fun is live data without trending? Job Link gave us a good excuse to accelerate the development of trending into mQ! See superheat swings, pressure changes, and know when the temperature split has stabilized and more. This is the first release, so expect more to come in the trending section, but it is rock solid and has most of the key elements you will want to see.
- Tired of things you know are not the problem showing up in diagnostics? Scan, check and clear out problems that are not issues.
- Getting lost in and out of projects? An in project indicator will now show you when you are in an active project so you don’t accidentally overwrite data.
- Have multiple return and or filters? We have expanded the information section to add in multiple filters and grills. The total airflow is added together. We also provided provisions for zoning and handy drop downs to eliminate the need for fat fingering manual inputs.
- A ton of general improvements.
Want Wireless? Want wireless clamps for you iManifold® or iConnect®? Wait no longer! Use Job Link Probes and measureQuick and you will get an elegant fully functional solution! Job Link probes can be used for suction, liquid, discharge and outdoor air temperature completely eliminating the need for wired probes! Yes, it’s true, wireless for iManifold that actually has no wires!
Fieldpiece JL3PC Premium Pipe Clamp Probe (1/4″ to 1-3/8″) are sold individually and have an exceptional wireless range that will work for most all residential and most commercial applications. Take advantage of the patent-pending Rapid Rail sensor technology on the JL3PC Job Link Premium Pipe Clamp Probe for extremely fast and accurate measurements that surpass California’s Title 24 requirements. The JL3PC Job Link Premium Pipe Clamp Probe’s Rapid Rail sensor is specifically designed to work on HVACR electrically (and thermally) conductive piping. The Pipe Clamp Probe uses the pipe itself to complete the circuit so ambient air does not affect testing resulting in the highest temperature accuracy! We tested it against thermistor probes and it is constantly within 10ths of a degree. Navigate cramped spaces using the narrow jaw of the JL3PC Job Link Premium Pipe Clamp Probe. Mix and match products and probes to arrive at the perfect solution for your measurement needs.
Job Link ® is a registered trademark of Field Instruments Inc.