Already Use Fieldpiece? Get More From Your Tools.
measureQuick connects wirelessly to your Fieldpiece SMAN manifolds, Job Link probes, and clamp meters – then adds diagnostic intelligence that no single-brand app can match.
Most tool apps only work with that manufacturer’s hardware. If your company runs Fieldpiece manifolds, Testo temperature probes, and Redfish meters, you need three separate apps, three different interfaces, three sets of readings that never talk to each other.
measureQuick connects to 50+ tool brands through a single app. Your Fieldpiece smart tools, your Testo probes, your Navac vacuum pump – all feeding real-time data into one diagnostic dashboard. One technician.
One screen. Every tool.
When you connect your Fieldpiece smart tools to measureQuick, you do not just see pressure and temperature. You see design targets based on the actual equipment model installed. You see allowable ranges that tell you whether each measurement is within spec. You see diagnostic flags that highlight problems before they become callbacks.
The AI System Profiler goes further – it analyzes your full measurement set and identifies performance issues automatically. Then it assigns a System Vitals Score, giving you and your customer a clear letter-grade assessment of the system’s health.
A2L-Ready Documentation
A2L refrigerant transitions demand thorough documentation. measureQuick’s commissioning workflow records nitrogen purge, evacuation to manufacturer micron spec, charge weight verification, and electrical checks – producing ACCA Quality Installation certificates that prove compliance. Job Link records basic measurements. measureQuick proves quality.
“Great Preventative Solution”, Jonathon Jachura
If you want to avoid HVAC failures, potential water damage, and costly repairs, SmartAC’s monitoring kit is a great preventative solution. It provides 24/7 monitoring, immediately informs you of issues (like leaks), identifies trends that may lead to breakdowns, and puts you in fast communication with local HVAC technicians.
“Report Goes to the Customer”, Jason Julian
When I pull out my iPad and say I’m going to run a heat load, customers immediately see that I’m different from the last contractor who just wrote down a quote.
“Indispensable to Me”, Matthew Bruner
It gives me information that no other tool can give me. From the confidence to know that a system is delivering full capacity on a hot day, to diagnostic problems that I can’t figure out on my own, MeasureQuick is a one of a kind software. I have just started my own company, and plan to fully implement the capabilities of this software on my maintenance, and commissioning of new systems as I grow my business. There are very few companies I admire as much as the team at MeasureQuick, because I know this is so much more than just…
“Ethically Offer Better Options”, Tim DeStasio
Is it possible to run less service calls but be more profitable? Yes! With total system diagnostics using measureQuick you can ethically offer better options and actually sell them.
“Delivered BTUs at My Fingertips”, Matthew Bruner
Heck, with an app like measureQuick, I can see delivered BTUs and get troubleshooting tips at the tip of my fingers.
“Letter Grade for the Consumer”, Adrian Garcia
And once we know airflow, and we know our temperature and humidity drop, then we can figure out how many BTUs of sensible heat this unit’s doing… Whereas before, what were we doing? We’re gauging up, okay well I’ve got 25 degrees superheat that’s a little bit high but I don’t know maybe it’s normal… But now it is so easy to hook up some probes to a unit and say your three ton unit is operating at three tons, we’re good to go.
“Less Customer Churn Now”, Terry Zarling
Calling customers proactively because we detect a fan out of spec is a great way to over-deliver and add value. My customers appreciate that we spot small problems before they become big ones. The fastest way to lose a customer is to have their system fail, and they’re left sitting in a 95-degree house.
“Ticket Averages Went Way Up”, Michael Housh
We believe that measureQuick sets us apart from our competition by offering this data that is more current with the times. A lot of other companies in my area are still stuck in the Stone Age… We’re able to market ourselves as the leading edge of technology and doing what is right for our customers.
“Blew Up Our Reviews”, Michael Housh
I have always known that good software can, and should, augment the way that we do business in the trades, but there had never been really good software for technicians in the field. Most of the HVAC software is centered around business operations (CRM, Accounting, etc.) or design (Manual-J, Manual-D, etc.). Those softwares are important, don’t get me wrong, however for technicians in the field, there has never been a more powerful tool than what MeasureQuick offers. The ability to unify and communicate with the awesome selection of connected tools that are available on the market today is one of…
“Be More Professional, More Precise”, Mike Cotto
If you’re not using measureQuick, you’re doing it all wrong. Start using measureQuick, be more professional, be more precise, and let’s be better out there. Let’s make the trades great again.
Your Fieldpiece Tools Deserve Better Software.
Connect your tools. See real diagnostics. Start free today.