One platform, first probe to signed-off report.
measureQuick captures live readings from the tools you already own, scores the system against live conditions, and turns it into a report the homeowner trusts. Residential HVAC commissioning, start to finish.
-
Built by Jim BergmannThe founder and the field's most-cited diagnostics educator.
- NIST-tested science
Lab-grade accuracy at 10x lower cost and 100x simpler deployment.
- Works with your tools
80+ tools across 17+ brands you already own.
Connect. Perform. Prosper.
The same three ideas run through every part of the platform. They are how the work gets measured, and how it pays off.
Works with the tools your team already owns
Pair the probes you bought from Fieldpiece, Testo, Sauermann, NAVAC, and dozens more, 80+ tools across 17+ brands in all. No brand lock-in, no second set of gauges.
Learn more →Grounded in measurement
Every reading is scored against live conditions and a 0 to 100 HVAC Vitals™ number. The system pinpoints what is wrong.
Learn more →Fewer callbacks, more documented revenue
A commissioning report the homeowner trusts closes the repair and proves the work. Standardized quality across every truck.
Learn more →From the gauge to the homeowner
One thread carries a reading from the probe to a report the customer keeps. Each step links to the feature that runs it.
Capture
Live probe data streams into the app the moment you connect. No manual transcription, no clipboard.
Diagnose
System View shows the whole thermal cycle at a glance. mQ Assist answers questions about the reading in front of you.
Verify
Readings normalize to rated conditions and roll up into an age-adjusted HVAC Vitals™ score that maps to ACCA QI.
Prove
A branded report with photos, video, and the Vitals score goes to the customer before you leave the driveway.
What the work looks like
The same lifecycle, on a real call: probes on the system, the cycle on the screen, the report in the customer's hand.
Probes on, data in
Connect the probes you already own and the readings stream in live. No transcription, no clipboard, no second set of gauges.
The whole cycle, one screen
System View draws the live refrigerant cycle from your readings, so the diagnosis starts from the whole system. The air side and the refrigerant side sit on the same screen, which is how a tech sees that a low suction is an airflow problem before adding charge to chase it.
Stephen Rardon, owner of Smart Home Comfort, describes the view it gives him: "measureQuick is the simplest way to see from the refrigeration circuit to the air side of the system, literally the entire system. In one screen and understand within minutes that the system is functioning properly."
A report the homeowner keeps
The branded report carries the measurements, the Vitals score, and the findings in plain language. The proof leaves the driveway with the customer.
What the platform proves
One voice from the field on what the whole platform gives a job: information no single tool delivers, from full-capacity confidence on a hot day to the faults you cannot chase down on your own.
“It gives me information that no other tool can give me. From the confidence to know that a system is delivering full capacity on a hot day, to diagnostic problems that I can't figure out on my own, measureQuick is a one of a kind software. I have just started my own company, and plan to fully implement the capabilities of this software on my maintenance, and commissioning of new systems as I grow my business. There are very few companies I admire as much as the team at measureQuick, because I know this is so much more than just a paycheque for them. They really care about making the HVAC industry a better place, and it shows.”
Why technicians run measureQuick
The short version of what the platform does and why it changes the job.
Everything in the box
The free plan is a real diagnostic tool. Premier adds the cloud, the management layer, and the diagnostic intelligence.
In every plan
Free- Real-time diagnostics
- Multiple Superheat test
- Two-stage compressor diagnostics
- Classic reports
- 80+ tools, 17+ brands
- Refrigerant defaults
- SSO and multi-account
- Persistent settings sync
Premier
Premier- HVAC Vitals™ score
- System View
- Duct Airflow Traverse
- mQ+ interface
- mQ Assist
- AI System Profiler
- AI Search
- Live Data Streaming
- Cloud and reporting
- Documentation
- Tool Tracker
- Companywide checklist builder
- Gas Vent Sizer, Gas Pipe Sizer, Vent Termination Check
- PDF attachments in reports
- Standalone mode
- Documentation-only mode
Also in measureQuick
- Redesigned Pressure (leak) Test
- Indoor fan power estimates
- Combustion stability indicator
- Multi-cell furnace support
- Four-level CO indicator on heating Vitals
- Standard letter grades (90 A, 80 B, 70 C, 60 D)
- Mandatory checklist items
- Checklist import and export
When blower watts can’t be measured, measureQuick can estimate indoor fan power. Estimates are labeled as estimates and don’t count toward Title 24 or ACCA compliance.
See the full breakdown on pricing, or start with what an HVAC commissioning app has to do.
The field data behind the score
Three numbers from measureQuick's field diagnostic data show why a scored system earns the extra minutes on a job.
of systems run past the 0.5-inch static-pressure limit (n=84,682). The air side quietly drives the refrigerant readings, and it stays invisible until you measure it.
charge-failure rate on jobs commissioned against a benchmark, versus jobs never benchmarked. Benchmarking the system is what closes the gap.
what one avoidable callback costs on a service call or on an install (ACCA). Every system you score right is a drive you do not make twice.
Universal compatibility
Connects to 80+ Bluetooth tools across 17+ brands. Bring the probes you already trust.
Built on the data
Diagnostics validated against measureQuick's field data, run by 100,000+ technicians. The score is calibrated against the field.
Standards-backed
Scoring maps to ACCA QI, and the measurement is NIST-tested to lab-grade accuracy at 10x lower cost and 100x simpler deployment.
The open measurement platform
measureQuick works with tool makers, standards and certification partners, and the CRMs you already run. That open ecosystem is the advantage.
Questions, answered
What is the difference between the free plan and Premier?
The free plan is a real diagnostic tool: real-time diagnostics on 80+ tools across 17+ brands. Premier adds the HVAC Vitals™ score, System View, the cloud dashboard, reporting, mQ Assist, live streaming, and mQ+ at $49 per user per month.
Do I need special hardware?
No. measureQuick runs on a phone or tablet and connects to the Bluetooth probes you already own, 80+ tools across 17+ brands. There is no measureQuick-branded gauge to buy.
Is the measurement accurate?
The measurement is NIST-tested to lab-grade accuracy at 10x lower cost and 100x simpler deployment, and the diagnostics are validated against measureQuick's field data.
What standards does the score map to?
HVAC Vitals™ normalizes readings to rated conditions and maps to ACCA Quality Installation, so the diagnostic doubles as the compliance record.
See the whole system before you leave.
Real-time diagnostics on 80+ tools across 17+ brands are free forever. Premier is $49 per user per month.